Yespeed Apro series smart pdu firmware update center

2023-08-16 14:01:29 71

Latest firmware, click on the small box above to download

MetInfo enterprise content manager system | MetInfo CMS

Warm tips,Please check the version number of your PDU, Do not power off during the upgrade,avoid upgrade failure.


Latest firmware   2023/4/2220. esp32-pdu-seg-et_v1.3.16(20230422).bin Click on the small box above

         Increased power factor.

         The modbus input register address was changed due to increased power. The power factor comes after the frequency.

  1. 2023/4/6  esp32-pdu-seg-et_v1.2.14(20230406).bin Click to download

          Optimize the display of web pages, increase ICONS in the left menu bar, reduce the width of the home card,Parameter Settings -> Socket Settings. Trigger task .Make the line under the card name smaller(5px -> 3px)。 

  2. 2023/4/1 esp32-pdu-seg-et_v1.2.13(20230401).bin Click to download

              Add device information scanning function, can modify the device information,This function can be scanned by Device Settings -> Device information scanning.Switch this function, the default is on.

            Increase Device setup-> Soft restart device function, you can  restart the main control board without changing the output state of the socket.

  3.2023/3/21 esp32-pdu-seg-et_v1.1.13(20230331).bin   Click to download

            Optimizes the specified server domain name to obtain IP, DNS service failure restar time interval changed from 1 second to 10 seconds.

   4.2023/3/31esp32-pdu-seg-et_v1.1.12(20230321).bin   Click to download

            Optimize panel light dimming, Change from 0 1 2 3 4 5 6 7 8- don't display to 0 1 2 3 4 5 6- don't display

              Optimize cloud light display, Constant light on TCP connection, The server response to Login Successful Login is successful, Light flicker. If it's not connected, the lights are off.