YESPEED horizontal PDU YS73469 Phase 32A 8ways customized Sockets 19Inch PDU Support SSH TELNET MQTT 485Modbus
Intelligent PDU SMART ATS ping snmp telnet
- Model: YS73469
Intelligent PDU SMART ATS ping snmp telnet
Smart pdu
YESPEED YS73269 is a smart PDU (Power Distribution Unit) with 8 metered & switched power
outputs (6x IEC-320 C13 2x C19) and 1x SENSON (Digital TEMP Input). PDU measures power
consumption (A, kWh, TPF, W, V, Hz) and switching On/Off each power output individually.
Device supports local Ping & Power WatchDog and Scheduler functions.
YESPEED can be mounted in rack cabinets – horizontally, vertically, or as a 1U device. Each
output can user switch manually over the web, the YESPEED Cloud service, party integration
(http SSH, Modbus/TCP, SNMP, MQTT-flex, Telnet, ...).
With the YESPEED Cloud service, the outputs can be controlled from anywhere.
The YESPEED Cloud is paid service with welcome credit for new connected devices.
YESPEED Cloud is a TLS-secured service for controlling the outputs from anywhere
(Web or Open API).
Open API allows controlling the outputs over the network using various protocols
(http XML/JSON, Modbus/TCP, MQTT, SNMP, Telnet and more... ).
PROFESSIONAL PRODUCT
YESPEED YS73269 is suitable for industrial applications. The product works in a wide
temperature range (–20°C to +65°C), supports firmware upgrades over the web, remembers
the last socket states before being powered off
A power-on delay can be configured for each output. In this way, the outputs can be switched
on in a sequence after a power outage.
The SNMP protocol can be always used in parallel to outher APIs.
Regardless of the Open API used, the device can be always controlled from its web interface
TYPICAL APPLICATIONS
In IT, the smart YS-PX is typically used to measure & distribute electricity in a 19" rack (cabinet)
in a data center.
The connected appliances can be restarted from the web interface (each output can be switched
on / off or power-cycled).
Powered devices can be restarted autonomously by PING or Power consumption Watchdog
The outputs can be controlled with the Open API (SSH, Modbus/TCP, SNMP, MQTT-flex, Telnet,
...)
The device can work with various 3rd party programs and applications (Open API)
Power measurement of A, W, Wh, V, HZ, ...ELECTRICAL MEASUREMENTS
YESPEED YS73269 measures electrical parameters on 8 outputs + 1 total channel:
Measured values are displayed in the web administration interface and at the same time are
accessible via Open API protocols. YESPEED YS73269 measures with accuracy better than 1%.
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 8
All output together (power inlet)
User can define output state after power restoring - PowerUp state
POWER-UP STATE
For some applications, it is important to set the power socket state immediately after the
device is powered on (or the power is restored after a failure). With some machines it is
important to avoid momentary switch-on or switch-off. This parameter therefore defines the
behavior of the 110/230V output power socket before the standard communication with a
master system starts to work.
On
Off
LAST state restores the last state before the power was disconnected
Delay sequence when switching outputs on
After a power outage, some electrical appliances can be switched on with a delay to avoid
overloading and tripping circuit breakers. With the PowerPDU 4KS, use these parameters:
“Power-Up state” = ON / LAST, and “Output PowerUp interval” = power-up delay
before switching that particular output on.
WEEK SCHEDULER (TIMED SWITCHING OF INDIVIDUAL OUTLETS)
With the Scheduler (timer) function, each output can be individually switched on or off
at specified times and days of week. The switching times are easily configured in a graphical
interface.
Each output can have its own schedule
When a schedule is active, outputs can still be controlled with YESPEED Cloud, the web
interface and Open API
Scheduler functionality can be enabled/disabled (not edited) for each output
Scheduler does not need an internet connection. However, a time source needed – provided
over the internet or, for example, by a local ADSL / WiFi router.
For special usage the Scheduler can be combined with PAB (Power Analyze Blocks):
Switching time is based on current sunrise/sunset based on your location
Whatever happend, defined output can be switched off on defined time (midnight for example).
Ask for more..
TECHNICAL SPECIFICATIONS
Switched PDU YESPEED YS73269 Power Distribution Unit with four metered power outlets.
Each power output can be switched on/off individually via web, Mobile App, YESPEED Cloud
or Open API
LAN (RJ45): Yes
485 (RJ45):Yes
WiFi: yes
Online demo: Yes
Web: Built-in web server
FW upgrade: Yes (via device WEB interface)
Download: FW Archive
SSH
MQTT-flex (extended MQTT, SSL enabled)
HTTP Push JSON
HTTP Push XML
SNMP v1 V2C
SNMP v3
Modbus RTU/ TCP
XML over HTTP
Telnet (outputs only, backwards compatibility with KSHELL)
Lua support: No
Scheduler function: Yes
IP WatchDog function: Yes
Power WatchDog function: Yes
Sending emails: yes
Events Log: Yes (web)
Power input: 1x IEC320 C14 na 110/230V (10A)
Mechanical power switch: Yes
Power output: 2x IEC-320 C13 (max 16A) 6x IEC-32 c19
Number of controlled outputs: 4
Electrical measurement: Yes
Number of metered outputs: 4
Electrical measurements:
8x Current [A]
8x Consumption [kWh]
8x Reverse Energy [Wh]
8x Power [W]
1x TPF (True Power Factor)
Frequency [Hz]
Voltage [V]
Phase [°]
Accuracy:<1% (25°C)
Internal consumption: Max 4.7 W
Digital inputs (DI): 4x input (contact) + 4x senson
SPD - Surge protection: Yes,
Switching element: relay SPST-NO,
IOC (output state independent from FW update): Yes
PowerUp state of outputs: On / Off / LAST state
Mechanical characteristics: Metal housing, 220 x 40 x 120 mm
Mounting position: Horizontal (1x / 2x) / vertical in a 19“ rack
Protection: IP30
Sound output: No
Temperature range: -20°C to +65°C
Designed and manufactured: china
Cable cat5e *1